|
WITH FLAT OR OMEGA COVER STRIP FINISH.
The lining system allows to cover the walls with a finish identical to the partitions.
The two models of flat or omega cover strips are compatible with the 41 mm thick uprights, i.e. half the width of a partition from the S range.
It allows to use a half electric plinth as an alternative to the bottom wall plate.
|
Slim linings
- 41 mm thick lining with single facing.
- Bottom wall plate, half electric plinth 160 mm high fitted with two plinth covers.
- Aluminium upright of section 40x65 steel allowing the direct mechanical clipping of the cover strip.
- Lacquered aluminium cover strip, 37 mm wide,
flat or omega 5 mm visible thickness,
fitted with a 10 mm wide PVC spring ring.
- Facing panel, 13 mm thick covered plasterboard (vinyl, fabric, painting) or 12 mm wood panel (melamine, laminate, coated with fine oils).
|
Insulating lining
- 41 mm thick lining with single facing.
- Lacquered aluminium top and bottom wall plate, 38 mm high.
- Lacquered aluminium top wall plate, 33 mm high.
- Aluminium upright of section 40x65 steel allowing the direct mechanical clipping of the cover strip.
- Lacquered aluminium cover strip, 37 mm wide, flat or omega 5 mm visible thickness, fitted with a 10 mm wide PVC spring ring.
- Facing panel, 13 mm thick covered plasterboard (vinyl, fabric, painting) or 12 mm wood panel (melamine, laminate, coated with fine oils).
|
|
